BSMNL - STATE HGP HIGH GLOSS PROTECTANT

  • MSDS: BSMNL
  • Manufacturer: STATE CHEMICAL MFG CO
  • Product Name: STATE HGP HIGH GLOSS PROTECTANT
  • National Stock Number: 6850-00F031072
Product Identification

Product ID:STATE HGP HIGH GLOSS PROTECTANT
MSDS Date:06/01/1987
FSC:6850
NIIN:00F031072
MSDS Number: BSMNL

Responsible Party
STATE CHEMICAL MFG CO
3100 HAMILTON AVE
CLEVELAND, OH 44114-3701
US

Emergency Phone: 216-861-7114

Info Phone: 216-861-7114

Cage: 53798

Contractor
STATE CHEMICAL MANUFACTURING CO.
CLEVELAND, OH 44114-3701 US

Telephone: 216-861-7114

Cage: 53798

Ingredients

AMMONIUM HYDROXIDE, AQUA AMMONIA

CAS: 1336-21-6

RTECS: BQ9625000

Fraction By Weight: 1-3%

ACGIH TLV: 25 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ISOBUTANE, 2-METHYLPROPANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: <15%

OSHA PEL 1800 MG/CUM

ACGIH TLV: 800 PPM

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. INGESTION: HARMFUL
OR FATAL. INHALATION: AMMONIA VAPORS MAY BE IRRITATING.
OVEREXPOSURE TO HYDROCARBON SOLVENTS MAY CAUSE PERMANENT BRAIN &
CENTRAL NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE

First Aid

First Aid:INGESTION: DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH
AIR. SKIN: WASH W/SOAP & WATER. EYES: FLUSH IMMEDIATELY W/PLENTY OF
WATER FOR AT LEAST 15 MINS.

Fire Fighting

Flash Point Method:TOC
Flash Point:<0F PROPELLANT
Extinguishing Media:WATER FOG, CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:KEEP CANS COOL. USE SHIELDING TO PROTECT
PERSONNEL FROM VENTING, RUPTURING, BURSTING CANS.
Unusual Fire/Explosion Hazard:CAN EXPOSED TO >120F MAY VENT, RUPTURE,
BURST.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES. VENTILATE AREA. FLUSH
W/WATER OR ABSORB ON STATE OIL ABSORBANT. FLOOR WILL BE SLIPPERY.

Handling

Handling and Storage Precautions:CONTENTS UNDER PRESSURE, DON'T STORE
IN SUNLIGHT OR TEMPERATURES >120F. KEEP FROM FREEZING. AVOID
BREATHING SPRAY OF PRODUCT FROM CAN.
Other Precautions:DON'T PUNCTURE CANS. DON'T TAKE INTERNALLY. SHAKE
CANS WELL BEFORE USING. READ & FOLLOW ALL LABEL
DIRCTION/PRECUATIONS BEFORE USING. INTENDED FOR INDUSTRIAL USE
ONLY. KEEP AWAY FROM CHILDREN.

Exposure Controls

Respiratory Protection:AS REQUIRED
Ventilation:NORMAL IS SUFFICIENT.
Protective Gloves:OPTIONAL
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

Solubility in Water:COMPLETE
Appearance and Odor:WHITE SPRAY, LEMON ODOR
Percent Volatiles by Volume:11/WT

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPERATURES >120F, SUNLIGHT, FREEZING
Hazardous Decomposition Products:BURNED RESIDUE MAY FORM CO, CO2,
OXIDES OF SILICON.

Disposal

Waste Disposal Methods:DON'T PUNCTURE OR INCINERATE CANS. FACILITY
EQUIPPED TO HANDLE PRESSURIZED CONTAINERS. I/A/W LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.